Texas deregulated most of the state's electricity markets in 2002, a move aimed at lowering electricity costs by letting consumers choose their own electric power providers and their own plans. Some parts of Texas continued to be regulated, including those whose power is proved by municipally-owned utilities, electric cooperatives and investor-owned utilities that operate outside the state's primary power grid.
As you shop, you’ll see the rates advertised in terms of kilowatts per hour (kWh) — the energy used to power 1,000 watts for one hour. According to the U.S. Energy Information Administration, the average price per kWh for electricity in Pennsylvania is 14.52 cents, while the Public Utility Commission's “price to compare” currently hovers around 8.0 cents. Clearly, there’s a lot of price variety out there. And, given the hundreds of providers doing business in Pennsylvania, exploring electricity options can be pretty toilsome.
Deregulation seeks to drive down costs and spur innovation by breaking up energy monopolies. In their place, two separate entities take care of 1) generation and 2) distribution. Electric Generation Suppliers (EGS) create electricity and set their own prices for consumers. Electric Distribution Companies (EDC), a.k.a., your local utility company, bring that electricity to your home.
The world's first public electricity supply was provided in late 1881, when the streets of the Surrey town of Godalming in the UK were lit with electric light. This system was powered from a water wheel on the River Wey, which drove a Siemens alternator that supplied a number of arc lamps within the town. This supply scheme also provided electricity to a number of shops and premises to light 34 incandescent Swan light bulbs.
Texas deregulated most of the state's electricity markets in 2002, a move aimed at lowering electricity costs by letting consumers choose their own electric power providers and their own plans. Some parts of Texas continued to be regulated, including those that get power from municipal utilities, electric cooperatives and investor-owned utilities that operate outside the state's primary power grid.
Another unwelcome side effect of not knowing your average monthly kWh usage level is that you may end up paying more than you expect. This can occur when a customer inadvertently shops an electric rate based on a higher usage level than they actually use. Electricity suppliers commonly advertise their electric rates associated with the highest (2000 kWh) usage levels since those tend to be the lowest rates.
On the other hand, month-to-month variable rate (no-contract) plans don’t have cancellation fees. You won’t be penalized if you find a better deal elsewhere and want to make another switch. And, you won’t be stuck paying more than you should be if the market rate for electricity trends down. But, if it goes up, you’ll be paying more than your in-contract neighbors, and you’ll likely want to shop around again for a better deal.
The mid to late 1880s saw the introduction of alternating current (AC) systems in Europe and the U.S. AC power had an advantage in that transformers, installed at power stations, could be used to raise the voltage from the generators, and transformers at local substations could reduce voltage to supply loads. Increasing the voltage reduced the current in the transmission and distribution lines and hence the size of conductors and distribution losses. This made it more economical to distribute power over long distances. Generators (such as hydroelectric sites) could be located far from the loads. AC and DC competed for a while, during a period called the War of Currents. The DC system was able to claim slightly greater safety, but this difference was not great enough to overwhelm the enormous technical and economic advantages of alternating current which eventually won out.