Even though customers in deregulated cities routinely pay more for electricity, there is a bright spot. The gap between the average price paid for electricity between deregulated cities like Houston and regulated cities like San Antonio have dwindled to the narrowest point ever to 8.8 percent. Back in 2006, customers in deregulated cities were paying nearly 47 percent more for electricity than their counterparts in regulated cities.
Another unwelcome side effect of not knowing your average monthly kWh usage level is that you may end up paying more than you expect. This can occur when a customer inadvertently shops an electric rate based on a higher usage level than they actually use. Electricity suppliers commonly advertise their electric rates associated with the highest (2000 kWh) usage levels since those tend to be the lowest rates.
In finding you the best Texas electric rates, we only list electric companies that have great business stability, excellent service, environmental awareness, and transparent pricing. This protects you from providers that could soon go out of business, are unattentive to customers, are environmentally unsound, or may end up charging you a higher rate than advertised.
Another unwelcome side effect of not knowing your average monthly kWh usage level is that you may end up paying more than you expect. This can occur when a customer inadvertently shops an electric rate based on a higher usage level than they actually use. Electricity suppliers commonly advertise their electric rates associated with the highest (2000 kWh) usage levels since those tend to be the lowest rates.
Fixed-rate, long-term (contract) plans provide stability in electricity rates. If market energy costs suddenly trend upward where you live, you can rest assured that you won’t have to pay more out of pocket. However, if you want to switch to a different, lower-cost plan before the end of the contract term, you’ll likely have to pay a cancellation or early termination fee.
As you shop, you’ll see the rates advertised in terms of kilowatts per hour (kWh) — the energy used to power 1,000 watts for one hour. According to the U.S. Energy Information Administration, the average price per kWh for electricity in Pennsylvania is 14.52 cents, while the Public Utility Commission's “price to compare” currently hovers around 8.0 cents. Clearly, there’s a lot of price variety out there. And, given the hundreds of providers doing business in Pennsylvania, exploring electricity options can be pretty toilsome.
In finding you the best Texas electric rates, we only list electric companies that have great business stability, excellent service, environmental awareness, and transparent pricing. This protects you from providers that could soon go out of business, are unattentive to customers, are environmentally unsound, or may end up charging you a higher rate than advertised.
If you're a renter looking for shorter plan options, there might be energy solutions in your area that range from three months to one year. On the other hand, residents who are looking to settle into a home for a longer period of time can choose plans that last for more than one year. Are you searching for more than just the right supply rate and term length? Electric companies in Corpus Christi might offer features such as green energy products, customer referral programs and automatic bill payment services.
Pennsylvania offers first-time retail shoppers an attractive discount with the Standard Offer Program. The Public Utility Commission has a rotating list of retail providers and upon enrollment, they’ll hook you up with a 12-month fixed-rate plan at seven percent off the current utility price. You can cancel at any time without fees. For 1,000 kWh per month usage, PECO quoted us a price to compare of 7.13 cents. A seven percent discount brings that rate to 6.63 cents per kWh (lower than any plan on our provider list) — a $60 savings after a year of service.
Prepaid electricity plans are yet another option available to Texas customers. Prepaid plans let you avoid credit checks and deposits by pre-paying for your electricity. Prepaid electricity plans typically do not have a fixed duration and operate on a pay-as-you-go basis. Shopping for prepaid electricity can often yield relatively cheap electricity with no deposit. See Prepaid Electricity: Is It Right For Me? for more.
When we looked at each provider’s offerings, we focused on plans with innovative pricing or attractive deals, then did the math to find out which would pay off over time. To our surprise, the results were all over the board. Green plans weren’t always more expensive than their traditional counterparts. Sometimes a fluctuating variable rate is still cheaper in the long run. Our takeaway: It pays to shop around. We’ll walk you through our analysis — so you can do the same as you compare rates.
To be clear, no matter fuel portfolio of the plan you choose, your electricity’s make-up will be identical to your neighbors’. Depending on where you live, that could a mix of renewable and fossil fuels. Certificates offset your electricity use by putting an equal amount of clean energy into the electricity grid. If a plan is 100% renewable, that means it’s 100% offset with certificates.

Corpus Christi energy consumers are located in the AEP Texas Central transmission and distribution service provider (TDSP) area. Residents and business owners within the AEP Texas Central area should immediately report an outage or service request to AEP. Typically, poles and wires damaged by severe storms take more time to repair. AEP Texas Central customers who want to receive updates on outages and estimated repair times can enroll in a text message or email alert program. For immediate electrical help, Corpus Christi residents and business owners should first call the following number.
How did we get this number?This total is calculated by taking the wattage and daily usage of your common appliances and converting this into a monthly kilowatt per hour (kWh) usage rate. To figure out the estimated cost based on this rate, multiply your kWh per month by the cost of your energy (an average rate is $.12 per kWh). You can learn more about calculating your energy consumption by following the steps on this page.
 1.     Contracts:  Before, there were no contracts.  You signed up or you didn’t.  When it’s the only game in town, you have to play by their rules.  Nowadays, you’ll see these ultra-fabulous rates bandied about but it’s only by carefully scrutinizing the fine print that you’ll discover those wonderful rates come with a one-year lock-down or other catches.
As of April 2014, 16 U.S. states and the District of Columbia have deregulated electricity markets. Along with aforementioned Maryland and Texas, electricity deregulation is current in Connecticut, Delaware, Illinois, Maine, Massachusetts, Michigan, Montana, New Hampshire, New Jersey, New York, Ohio, Oregon, Pennsylvania, and Rhode Island. Seven additional U.S. states began the process of electricity deregulation but have suspended efforts: Arizona, Arkansas, California, Nevada, New Mexico, Virginia, and Wyoming.[5]

You may have noticed a lot of electric companies offering a ton of plans and services. But not all light companies in Texas are created equal. So which one is right for you? At Amigo Energy, we want you to trust that you’re getting a custom energy plan at a good price—not just a quick fix that’ll cost you more down the road. In fact, JD Power gave us four out of five stars for pricing, beating out a ton of other large retail electricity providers.4
It was later on in the year in September 1882 that Edison opened the Pearl Street Power Station in New York City and again it was a DC supply. It was for this reason that the generation was close to or on the consumer's premises as Edison had no means of voltage conversion. The voltage chosen for any electrical system is a compromise. For a given amount of power transmitted, increasing the voltage reduces the current and therefore reduces the required wire thickness. Unfortunately it also increases the danger from direct contact and increases the required insulation thickness. Furthermore, some load types were difficult or impossible to make work with higher voltages. The overall effect was that Edison's system required power stations to be within a mile of the consumers. While this could work in city centres, it would be unable to economically supply suburbs with power.[1]
×