Oncor, the state’s largest distribution utility which covers Dallas, Fort Worth and much of North Texas, has already agreed to pass all of the millions of dollars of expected tax savings along to consumers.  Oncor agreed to pass the savings along to customers as part of a rate review which is a formal process in which the PUC reviews the appropriateness of rates being charged by the utility.  No exact details have been determined with respect to how the savings will be passed along. The rate review was actually completed before the tax reform bill was passed but there was a commitment in principle to passing along the savings.  It’s not yet know exactly how much Oncor will save from the lower corporate tax rates but with a $245 million tax bill in 2017 future saving are likely to be in the tens of millions of dollars.


The mid to late 1880s saw the introduction of alternating current (AC) systems in Europe and the U.S. AC power had an advantage in that transformers, installed at power stations, could be used to raise the voltage from the generators, and transformers at local substations could reduce voltage to supply loads. Increasing the voltage reduced the current in the transmission and distribution lines and hence the size of conductors and distribution losses. This made it more economical to distribute power over long distances. Generators (such as hydroelectric sites) could be located far from the loads. AC and DC competed for a while, during a period called the War of Currents. The DC system was able to claim slightly greater safety, but this difference was not great enough to overwhelm the enormous technical and economic advantages of alternating current which eventually won out.[1]

Several states have Community Choice Aggregation (CCA) laws that allow local governments to pool their community’s electricity need in order to purchase power on their behalf.  While savings is not always guaranteed, many municipalities are able to obtain discounted electricity prices. You’ll have to check with your state regulatory commission. You can get started by clicking on your state in this map.


Another unwelcome side effect of not knowing your average monthly kWh usage level is that you may end up paying more than you expect. This can occur when a customer inadvertently shops an electric rate based on a higher usage level than they actually use. Electricity suppliers commonly advertise their electric rates associated with the highest (2000 kWh) usage levels since those tend to be the lowest rates.

The mid to late 1880s saw the introduction of alternating current (AC) systems in Europe and the U.S. AC power had an advantage in that transformers, installed at power stations, could be used to raise the voltage from the generators, and transformers at local substations could reduce voltage to supply loads. Increasing the voltage reduced the current in the transmission and distribution lines and hence the size of conductors and distribution losses. This made it more economical to distribute power over long distances. Generators (such as hydroelectric sites) could be located far from the loads. AC and DC competed for a while, during a period called the War of Currents. The DC system was able to claim slightly greater safety, but this difference was not great enough to overwhelm the enormous technical and economic advantages of alternating current which eventually won out.[1]

We offer AutoPay and average billing payment options to help save you time and money when you're paying your bill. And if you ever have issues with your electricity plan or your bill that you can't solve alone, you can contact our customer service team anytime you need help. We're available 24/7 through online chat or by phone to answer any questions you might have about your home electricity account. 
Deregulation seeks to drive down costs and spur innovation by breaking up energy monopolies. In their place, two separate entities take care of 1) generation and 2) distribution. Electric Generation Suppliers (EGS) create electricity and set their own prices for consumers. Electric Distribution Companies (EDC), a.k.a., your local utility company, bring that electricity to your home.

Know that Green Mountain’s cheapest advertised plans are all variable rate plans. “Pollution Free,” “Pollution Free Try 3,” or “SolarSPARC 10 Try 3” all advertise a great initial rate — a full cent below Pennsylvania’s 8.49 cent “price to compare” — but its variable rates means the company can raise them at any time. The two “Try 3” plans just lock in the low introductory rate for three months instead of one. The flipside of fixed rate: Should prices fall, you’ll be locked into a contract with a constant, elevated rate for two more months.
In summary, fixed-rate plans provide a level of certainty and stability in your energy charge since the price will not fluctuate over the life of your contract. If prices suddenly spike, you are protected because your rate is locked in. The flip side is that if rates drop over the life of your contract, you’ll be stuck paying the higher rate. You can incur steep cancellation fees if you change electricity plans or providers before the end of your contract term.
You’ll also see a flat rate and a price per kWh rate for TDU or TDSP (which stand for Transmission and Distribution Utility or Transportation Distribution Service Provider). These are costs that your utility charges for delivering electricity and maintaining power lines. The costs are unique to your local utility and have nothing to do with your electricity provider.

Energy deregulation in Texas means you have the opportunity to shop electric companies to find the one that's right for you. What are the best electricity companies? That depends on what YOU want. Here at SaveOnEnergy.com®, we work with nearly all the top electric companies to make sure you'll get reliable, straightforward service and plans, regardless of the retail electricity provider you choose.
×